Revolver revolver system
• Revolver revolver system
It Nagan revolver sample in 1895 year system. It was developed by the Belgian gunsmiths - the brothers Emil and Leon Nagant, and produced in Russia at the Tula Arms Plant. And a lot of that still. I will not dwell on its history, and just talk about what's inside.
So Nagan fairly late release (this particular - the forties of the last century). Caliber 7, 62 mm. The trigger mechanism double action. Ammunition: the drum for seven rounds. Muzzle velocity: 270 m / s. . Sighting range - 50 m Rate of fire: seven shots for 15-20 seconds
, make sure that our revolver was not loaded before disassembly. To do this, open the door on the right side of the gun and turn the drum, inspect all of its cells - the chambers. Incidentally, the charging and discharging a revolver, unlike most other revolvers, only through this door. One patron! In it lies the main flaw of its design.
Rotate ramrod around its axis and push it forward.
Taps ramrod extended to the right and release the drum axle. Now you can simply pull forward.
The drum on anything no longer holds. It can squeeze out frame aside.
For the most part, finished dismantling revolver. But this is only the so-called "partial disassembly". Let's go ahead.
To do this we need to have a tool. Especially for such cases complete with a revolver was full-time driver with a big wooden handle (I do not know where and how it was supposed to wear it). But the historical instrument once more alarming and will not use the modern. Unscrew the top (!) Screw on the right cover of the revolver.
screw itself is right, and he holds the left frame cover. When his unscrew the lid can be removed and see the trigger mechanism revolver. Here he is in front of you.
Now you have to remove the V-shaped mainspring. Make it easy - it is tight, and if the stupid hook it with a screwdriver, and you can get on the forehead!
To remove a spring allows you to pull the trigger. In this instance the trigger of the revolver by itself is a separate structure. In addition Udarnitsa it fastens with a spring rod (to remove it, we will not - too small cog in there). This is the part that distinguished self-cocking "officer" of the revolver nesamovzvodny "soldier". Yes, in the tsarist army were armed with two versions of a revolver, which differed only by the design of the trigger. From the officer could shoot simply by pressing repeatedly trigger hook until the empty drum, and a soldier before each shot had to be cocked thumb trigger. It was once believed that it helps to save bullets - they say, cocking, soldiers once again to think, and whether it is worth shoot ...
Continue to disassemble the trigger mechanism. Removing the dog - it is simply removed from the trigger. Dog - the most important part of his revolver. And it is very characteristic. She turns with every shot drum, substituting another cartridge under the hammer. And it shifts the reel forward, "Pulling" to his trunk. This ingenious solution avoids breakthrough powder gases into the gap between the barrel and the drum. Unlike other designs of revolvers at a shot here this gap is simply no!
It's time to unscrew the second screw of the right cover. He holds the trigger guard. In principle, it does not prevent us, I just want to show that it is also removable.
Taps bracket in hand. Remove the trigger so all the more convenient.
They took off the hook trigger - it just is mounted on the axle.
Take out the slider down (by the way, "soldier" revolver, he is also a bit different) and release the breech. During firing it rests on the bottom of the sleeves and he, along with a dog, moves the entire reel forward.
Now almost everything! I did not pull out of the drum spring-loaded sleeve and did not remove the lining of the handle. They are wooden and already dilapidated and keep their screws are tightened with all my heart. Afraid to hurt. I also did not twist the trunk. On this specific instance revolver make it impossible. Everyone who at least in general terms, are familiar with the "Law of weapons ...", will understand why. The rest just say - wrong!
That is, the image specifically for the champions of law and order - I'm a law-abiding citizen.
And in the end, just in case, I will give the scheme itself, that neither is, complete disassembly. It is also called "an explosion diagram" because the object on it as if exploded!